Maintaining proper chlorine levels is essential for a safe, clean, and swim-ready pool. If you’re a new pool owner or a DIY enthusiast, learning how to program your chlorine dosing pump can make all the difference in keeping your water balanced with minimal hassle.

In this guide, we’ll walk you through the complete chlorine pump setup—from setting the time to programming the dosage and schedule.

Start by holding the menu button for three seconds to access the settings. Navigate to “Date and Hour” and set the current time. Once the time is saved, enter the “Dosing” menu, select “Timer”, and choose Timer 1. Set it to ON, then enter your desired start time—we recommend 11:00 AM for consistent daily dosing.

Next, input the dosage amount in milliliters—in this example, 300 mL (about 10 oz). Set the flow rate to 85–90% for a strong, priming dose. Finally, go through each day of the week and confirm it’s set to run (look for the “X” on each day).

Once complete, press escape twice, then hold it for three seconds to return to the main menu. Your pump is now fully programmed!

Whether you’re learning for the first time or just need a refresher, this guide simplifies the process. For more pool maintenance tips and how-to videos, check out our blog or contact us for expert help.